What Is The DX53D+Z Galvanized Steel Sheet Equivalent Material?

 

DX53D is a low-carbon, cold-forming steel, mainly iron with small carbon and alloying elements. The "DX" shows its drawing-grade steel, "53" indicates higher formability, and the second "D" means it's hot-dip galvanized for rust resistance. Known for deep drawing, DX53D suits complex shapes and thicker sections needing shape retention and flexibility. Equivalent to EN FeP05G and numbered 1.0951 in EU standards, it's used in automotive, construction, and machinery.

 

 

Low carbon steel for cold forming (DX51D – DX54D)

 

• DX51D is equivalent to Commercial Steel, curved and profiled
• DX52D is equivalent to Forming Steel
• DX53D is equivalent to Deep Drawing Steel
• DX54D is equivalent to Extra Deep Drawing Steel

 

Structural Steels (S220GD – S350GD)

S220GD,S250GD,S280GD,S320GD,S350GD

Use structural steel for high load-bearing capacity, with a yield strength of 220-350

 

 

Galvanized steel sheet is widely used in various environments and has a long anti-corrosion life. The anti-corrosion life is different in different environments.

The processing cost is low, and the anti-corrosion cost of galvanized steel sheet is lower than other paint coatings.

Durable, in the suburban environment, the standard galvanized anti-corrosion layer does not need to be repaired and can be maintained for more than 50 years. In cities or offshore areas, the standard galvanized anti-corrosion coating can be maintained for 20 years without repairs.

Good reliability. The galvanized layer and the steel are metallurgically combined and become part of the rigid surface, so the durability of the coating is relatively reliable.

The coating has strong toughness, and the zinc coating forms a special metallurgical structure, which can withstand mechanical damage during transportation and use.

Integrity protection: All parts of the plated parts can be galvanized, even in recesses, sharp corners and hidden places can be fully protected.

It saves time and effort. The galvanizing construction speed is faster than other coating construction methods, which can avoid the time required for on-site painting after installation.

 

 

	EN 10346:2009		GBT 2518-2008	JIS:G3302-2005	ASTM A653M
DX53D+Z	DX53D+Z		DX53D+Z	SGCD2

 

 

	0.12~2.5mm
	1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
	1000-6000 or Since the custom
	Blank (Circle), Ring (Flange) etc.

 

 

		C			P	S
DX53D+Z	Min.	-	-	-	-	-	-
	Max.	0.12	0.5	0.6	0.12	0.045	0.3

 

		C			P	S
	DX51D+Z	0.12	0.50	0.60	0.100	0.045	0.30
	DX52D+Z	0.12	0.50	0.60	0.100	0.045	0.30
	DX53D+Z	0.12	0.50	0.60	0.100	0.045	0.30
	DX54D+Z	0.12	0.50	0.60	0.100	0.045	0.30
	DX56D+Z	0.12	0.50	0.60	0.100	0.045	0.30
	DX57D+Z	0.12	0.50	0.60	0.100	0.045	0.30
		0.15	0.50	0.80	0.050	0.030	0.025
	SGCD1 SGCD2	0.12 0.10	0.50 0.50	0.60 0.45	0.040 0.030	0.030 0.030	0.025 0.025
	SGCD3	0.08	0.50	0.45	0.030	0.030	0.025
	SGCD4	0.06	0.50	0.45	0.030	0.030	0.025
	SGC340	0.25	0.50	1.70	0.200	0.035	0.025
	SGC400 SGC440	0.25 0.25	0.50 0.50	1.70 2.00	0.200 0.200	0.035 0.035	0.150 0.150
	SGC490	0.30	0.50	2.00	0.200	0.035	0.025
	SGC510	0.30	0.50	2.50	0.200	0.035	0.025
	S220GD+Z	0.20	0.60	0.70	0.100	0.045	0.025
	S250GD+Z	0.20	0.60	0.70	0.100	0.045	0.025
	S280GD+Z	0.20	0.60	0.70	0.100	0.045	0.025
	S320GD+Z	0.20	0.60	0.70	0.100	0.045	0.025
	S350GD+Z	0.20	0.60	0.70	0.100	0.045	0.150
	S550GD+Z	0.20	0.60	0.70	0.100	0.045	0.150